3mm Allen key
10mm
15mm
15mm
10mm
Spacers
Tightening torque:
3 N·m {26 in. lbs.}
Cable tie
Spacers
Closed
Open
At rear derailleur
At junction (A)
At front derailleur
2mm Allen key
Battery mount fixing bolt
(M4 x 15mm)
32
33
Installation of the battery mount
1.
Set the electric wire for the battery mount into the groove in the electric wire cover for the battery mount.
2.
Place the accessory spacers in between the battery mount and the frame and then secure them by tightening the bolts.
* If installing the bottle cage, it is easier to install it at this stage.
* Refer to the Service Instructions for the bottle cage for details on the tightening torques.
3.
Use the accessory cable tie to secure the battery mount to the frame.
1
2
3
* If there is a mounting boss on the frame, the
battery mount can be secured to the frame with
a bolt.
Installation of the grommets
Install grommets in appropriate positions for the electric wires by inserting the bottoms into the holes in the frame and then
pushing the tops to fit them into place.
If the bottle cage which is installed to the seat tube
interferes with the battery, move the position of the bottle
cage upward. The installation position for the bottle cage
can be moved upward by a minimum of 32 mm and a
maximum of 50 mm from the original installation position.
* If it interferes with the mounting boss for the front
derailleur, use the accessory spacer.
* Refer to the Service Instructions for the bottle cage for
details on the tightening torques.
$
Installation of the bottle cage adapter
Tightening torque:
1.2 - 1.5 N·m {10.4 - 13 in. lbs.}