38
MAINTENANCE
Replacement and assembly of the indicator unit
For internal 11-speed
Removal
(B)
(C)
(A)
(B)
Operate the release lever 10 times or
more to set it to 11 .
Loosen and remove the three cover
fixing screws which are securing the
indicator unit.
Remove the indicator unit as shown in
the illustration.
(A)
Release lever
(B)
Cover fixing screws
(C)
Indicator unit
Installation
1
(A)
(D)
(E)
(B)
(F)
(C)
(G)
Check that the needle of the indicator is
on the left side ( 11 position), and then
install the indicator unit so that it is
facing straight upward.
At this time, check that the main axle is
installed in the cam unit hole and that
the pin of the cam unit is installed in the
winder unit hole, and then insert the
indicator shaft protruding from the
bottom of the indicator unit into the
groove of the cam unit.
(A)
Indicator shaft
(B)
Cam unit groove ( 11 position)
(C)
Cam unit pin
(D)
Indicator unit
(E)
Cam unit hole
(F)
Main axle
(G)
Winder unit hole
2
Secure the indicator unit with the three cover fixing screws.
Tightening torque
0.3 - 0.5 N·m
3
Operate the main and the release levers, to check their operation.
If they do not operate correctly, reinstall the indicator unit while taking particular note of
step 1.
Summary of Contents for Alfine S7000 Series
Page 9: ...LIST OF TOOLS TO BE USED ...
Page 11: ...INSTALLATION ...
Page 30: ...ADJUSTMENT ...
Page 34: ...MAINTENANCE ...