Shimano Alfine S7000 Series, Dealer'S Manual

Page: 16 / 47

16
INSTALLATION
Installation of the hub to the frame
To be continued on next page
„
Installation of the hub to the frame
1
LOCK
(A) (B)
When not using the chain tensioner
Mount the chain on the sprocket, and
then set the hub axle into the fork ends.
(A)
Hub axle
(B)
Fork ends
(C)
Chain tensioner
NOTE
When using the chain tensioner, be sure to
read these service instructions in conjunction
with the service instructions for the CT-S500
chain tensioner.
LOCK
(B) (A)
(C)
When using the chain tensioner
Mount the chain on the sprocket, and
then set the hub axle into the fork ends.
2
LOC
K
7R
(A) (B)
(E) (D) (C)
Place the non-turn washers onto the
right side and left side of the hub axle.
At this time, turn the cassette joint so
that the projecting parts of the non-turn
washers fi t into the grooves of the fork
ends. If this is done, the cassette joint
can be installed so that it is almost
parallel to the chainstay.
(A)
Non-turn washer (for left side)
(B)
Groove of fork end
(C)
Chainstay
(D)
Cassette joint
(E)
Non-turn washer (for right side)
TECH TIPS
•
Use whichever non-turn washers match the
shape of the fork ends. Different non-turn
washers are used at the left and right sides.
•
The projecting parts should be on the fork
ends side.
•
Install the non-turn washers so that the
projecting parts is securely in the fork ends
grooves on either side of the hub axle.
Mark
θ
Fork ends
Non-turn washer
Mark / Color
Size
Right Left
Standard
5R/Yellow 5L/Brown
ϴ
≤ 20°
7R/Black 7L/Gray 20° ≤
ϴ
≤ 38°
Reversed 6R/Silver 6L/White ϴ = 0°
Reversed
(full chain case)
5R/Yellow 5L/Brown
ϴ
= 0°
Vertical 8R/Blue 8L/Green
ϴ
= 60° – 90°