7
．
Serial Communications Connection Procedure
25
12
The dialog box on the right is
displayed. Confirm that there is
no problem, and click
Yes
.
13
Check that CX-Programmer and
PLC are online.
*The
icon is pressed down
during online connection.
Additional Information
If the online connection to the PLC cannot be established, check the cable connection.
After checking the cable connection, return to step 6, check the settings such as the
connection type described in steps 7 through to 9 and then try online again.
For more information, refer to
Connecting Directly to a CJ2 CPU Unit Using a USB Cable
of
the
CX-Programmer OPERATION MANUAL
(Cat. No. W446).
Additional Information
Some dialog boxes described in this guide may not be displayed depending on the
environmental settings of CX-Programmer. Refer to
Options and Preferences
in
CHAPTER 3
Project Reference
of the
CX-Programmer OPERATION MANUAL
(Cat. No. W446) for
information on the environmental settings.
The procedures in this guide assume that ''Confirm all operations affecting the PLC'' is
selected.
Summary of Contents for OMRON CJ Series
Page 82: ...2020 0120 0120 P732 E1 01...
