7
．
Serial Communications Connection Procedure
24
10
Check that the network type is
set to USB in the Change PLC
Dialog Box. Click
OK
.
*If not, select
USB
from the
pull-down list.
*If you have changed the device
type in step 8 or the CPU type
in step 9, the dialog box on the
right will be displayed.
Confirm that there is no
problem, and click
Yes
.
Make sure the program is
converted normally.
("0 errors" must be shown.)
(Although the duplicated output
warnings are detected as
shown on the right, they are not
problems.)
11
Select
Programs
in the project
workspace.
Select
Work Online
from the
PLC Menu.
Summary of Contents for OMRON CJ Series
Page 82: ...2020 0120 0120 P732 E1 01...
