Sherwood TX-5505iD, Operating Instructions Manual, Page: 13 / 27

( or )
• Each time the TUNING/PRESET MODE button is
pressed, the mode changes as follows :
Tuning mode
↔
Preset mode
(“P” goes off) (“P” lights up)
■
On the remote control
• Select the desired preset number.
• When using the NUMERIC buttons.
Examples:
For “3” :
For “21” :
For “40” :
E
N
G
L
IS
H
Tuning to preset stations
Listening to FM stereo broadcasts
■
On the front panel
• Press the TUNING/PRESET MODE button to select the
preset mode, then rotate the TUNING/PRESET knob to
select the desired preset number.
• Then “DELETE OK?” is displayed for several seconds.
• When “DELETE OK?” is not displayed, perform the step 2
again.
• Then the stored frequency (and its name) will be erased
from the memory.
• While listening to FM broadcasts,
• Each time the STEREO/MONO button is pressed, the FM
mode changes as follows :
STereo mode
↔
MONO mode
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
(“ST” and STEREO indicator
light up)
(“MONO” lights up and
STEREO indicator goes off)
13
TUNING / PRESET T/ P MODE
MENU
within 3 seconds
within 3 seconds
within 3 seconds
Erasing preset stations
• You can erase the preset stations as desired.
1.
Select the preset station to be cleared by
performing the preset tuning operation.
3.
Press the TUNING/PRESET knob or the
ENTER button.
2.
Press and hold down the TUNING/PRESET
knob or the MEMORY button for more than 3
seconds.
TUNING / PRESET
or
or
TUNING / PRESET
TX-5505iD(G)_ENG_101110_TX-5505iD(G)_ENG 2010-11-10 오전 9:30 페이지 13