E
N
G
L
IS
H
12
Continued
■
On the remote control
• When using the NUMERIC buttons
Examples:
For “3” :
For “21” :
For “40” :
• Then it enters the name entry mode (that allows you to
give a name to the station) and the first digit flickers for
several seconds.
• Up to 8 characters can be entered for each name.
• If you do not give a name, perform the step 7, but ignore
the steps 4 ~6.
• The station and its name have now been stored in the
memory.
• A stored frequency and its name are erased from the
memory by storing new ones in its place.
• If the preset number does not flicker, disappears or the
digit does not flicker, start again from the above step 2.
• Then the selected digit flickers.
4.
Press the CURSOR LEFT(
◀
)/RIGHT(
▶
)
buttons to select the desired digit.
3.
Select the desired preset number(1~40) and
press the ENTER button.
• You can enter the desired among blank, A~Z, 0~9, ^, ’, (,
),
, +, ,, -, ., /, =.
5.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to enter the desired character on the flickering
digit.
6.
Repeat the above steps 4 and 5 to enter the
desired characters on the rest of the digits.
8.
Repeat the above steps 1 and 7 to memorize
other stations.
7.
Confirm your entry.
or
within 10 seconds
within 10 seconds
within 10 seconds
within 10 seconds
within 10 seconds
within 10 seconds
F
S T
M
M
8 9 . 1 0
0 2
Hz
P
TX-5505iD(G)_ENG_101110_TX-5505iD(G)_ENG 2010-11-10 오전 9:30 페이지 12
