E
N
G
L
IS
H
46
• You can select the crossover frequency among 30, 50, 80, 100, 150 and 200 Hz.
■
About the crossover frequency
• When speakers are set to "SMALL", low frequencies in those channels that are below the crossover frequency are to output
from subwoofer or front speakers which are set to "LARGE" (when not using a subwoofer).
• Refer to the operating instructions of the speakers to be connected. If the frequency range of your speaker is 100 Hz~20 kHz,
the crossover frequency should be set to 100 Hz(or slightly higher).
When selecting the CROSSOVER
• When speakers are set to "SMALL", be sure to set their crossover frequency correctly according to their frequency
characteristics.
■
Note :
• Even though performing the AUTO SETUP procedure, you should set the CROSSOVER manually when speakers are set to
“SMALL”.
1.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons to select the "X-OVER", then press the ENTER button.
2.
Press the CURSOR LEFT(
◀
)/RIGHT(
▶
) buttons to set the crossover frequency as desired.
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 46
All manuals and user guides at all-guides.com
all-guides.com
