E
N
G
L
IS
H
1.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to select the desired item.
2.
Press the CURSOR LEFT(
◀
)/RIGHT(
▶
)
buttons to set the selected item as desired
SETTING THE SYSTEM
38
AMP : S.BACK / F.H / ROOM 2 / BI AMP
SW M : NORM / SW +
TONE : OFF / ON
RETURN
BASS : 0 / - 10 ~ + 10
TRE : 0 / - 10 ~ + 10
• AMP ASSIGN : To assign the power amplifier correctly depending on how to use the speakers.
• SW M(SUBWOOFER MODE) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• RETURN : To return to the previous menu.
When selecting the AMP ASSIGN
• The SURROUND BACK channels’ power amplifier can drive surround back speakers, front height speakers, ROOM 2
speakers or bi-amp capable speakers. Depending on how to use the speakers, you should assign the power amplifier
correctly. (For details, refer to “CONNECTING SPEAKERS” on page 9 and “CONNECTING ROOM 2 OUT JACKS OR ROOM
2 SPEAKER TERMINALS” on page 11.)
→
S.BACK (SURROUND BACK) : To drive the surround back speakers when connecting the SURROUND BACK channels to
↕
them
F.H (FRONT HEIGHT) : To drive the front height speakers for Dolby Pro Logic IIz playback.
↕
ROOM 2 : To drive the ROOM 2 speakers for ROOM 2 playback.
↕
→
BI AMP : To drive the bi-amp capable speakers for bi-amplification.
When selecting the SUBWOOFER MODE
• "SW
＋
" mode is effective only when “F”(Front) and "C"(Center) are set to "LARGE" and "SW"(Subwoofer) is set to "YES" on
the SPEAKER/ROOM EQ menu. (For details, refer to "SETTING THE SPEAKER/ROOM EQ" on page 42.)
NORM : When the low frequency signals of channels set to "LARGE" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the ".1"
channel) and the channels set to "SMALL".
SW
＋
: When the low frequency signals of channels set to "LARGE" are reproduced simultaneously from those channels and
the subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and shape
of the room, interference may result in a decrease of the actual volume of the low frequency range.
↕
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 38
All manuals and user guides at all-guides.com
