E
N
G
L
IS
H
System Setup
36
• The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most
situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be
changed later.
The setup menu consists of 7 main menus ; system, input, speaker/room EQ, CH level, multi room, parameter and HDMI.
These menus are then divided up into various sub-menus.
■
Navigating through the setup menu
• The explanations here assume you are using the buttons on the remote control when performing the setup menu operation.
However, you can use the buttons on the front panel as well.
The buttons on the front panel correspond to those on the remote control as shown below.
SETUP
ENTER / MEMO
PRESET
TUNE
MAIN MENU
• The setup menu will be shown.
• To turn the menu off, press this button again.
• When selecting "SYSTEM", see "SETTING THE
SYSTEM" on page 38.
• When selecting "INPUT", see "SETTING THE INPUT" on
page 40.
• When selecting "SPK/EQ", see "SETTING THE
SPEAKER/ROOM EQ" on page 42.
• When selecting "CH LEVEL", see "SETTING THE CH
LEVEL" on page 48.
• When selecting "MLT ROOM", see "SETTING THE
MULTI ROOM" on page 50.
• When selecting "PARAMTR", see "SETTING THE
PARAMETER" on page 51.
• When selecting "HDMI", see "SETTING THE HDMI" on
page 53.
• When selecting "EXIT", the setup menu will be turned off.
1.
Turn the setup menu on.
2.
Select the desired menu using the CURSOR
UP(
▲
)/ DOWN(
▼
) buttons.
3.
Confirm your selection.
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 36
All manuals and user guides at all-guides.com
all-guides.com
