Sherpa SX-MD16E, User Manual

Page: 8 / 14

Control of water switch triggers (Fig. 6)
(II) Spraying on the trailer.
Loosen adjuster at the lower end of the handle bar to suit
the height of operator. (Fig. 7) The straps should be
folded and stored in the tray provided. (Fig. 8)
After the spraying starts, the operator can pull the trailer
with one hand and move forward while using the spray
boom with the other hand. The spraying should be
conducted to the side. The operator should move forward
at constant speed to avoid over-spraying or missing areas.
Never spray in the direction of the wind. The operator
should never stand in the spray drift always walk with the
wind behind you.
Spraying in knapsack mode:
(1) Dismounting of trailer.
When spraying on terrain not fit for trailer, the trailer
may be dismounted and the Sprayer may be mounted
on the operator’s back.
Refer to Fig. 9 for dismounting of trailer. Turn the two
locking nuts on the upper part of trailer anti-clockwise
to separate the trailer from the Sprayer (Fig. 10)
Fig. 7
Fig. 9
Fig. 9
Fig. 10
Fig. 6
Fig. 7 Fig. 8