SHERCO ST 125, Workshop Manual

Page: 14 / 51

12
ST SERIES
CYCLE PARTS
•
Remove the spacer
[8]
and the
washer between it and the spring
.
•
Take the spring
[9]
out of the fork
tube, taking care to dry it with a cloth.
•
Drain the oil from the fork tube.
•
Fill the arm with 250cc of new oil.
•
Pump the tube several times then place
it in the maximum compression
position.
•
Measure the volume from the top of the
tube and top up with oil until you reach
the desired level.
Oil level : 130mm
•
Reassemble in order, the spring, the washer, the spacer, the conical spacer then the top cap
•
Place the fork in a vice using a
protection for the tube and tighten the
plug to
12N m.
8
9