SHERCO ST 125, Workshop Manual

Page: 27 / 51

25
ST SERIES
DISASSEMBLY OF THE ENGINE
•
Remove the crankcase and the central gasket.
❱❘ Removal of the gearbox
•
Take out the two fork axles and push the
forks sideways to free them from the
barrel.
•
Take out the left fork and the central fork.
•
Remove all of their bearings, the primary,
secondary shaft, barrel and right fork
simultaneously.
WARNING
Avoid as much as possible the insertion
of a screwdriver or any other tool between
the crankcases to separate it. You risk
damaging the joint planes.
WARNING
Pay attention to the shims of the gearbox
shafts. They can remain stuck inside the
casings.
WARNING
When removing, take care to identify the
location of the washers at the end of the
shaft.