Shenzhen Hongdian Technologies H8922, User Manual

Page: 94 / 157

Doc. Version 1.0
85
H8922 3G/4G Router User Manual
BGP configuration
Border Gateway Protocol (BGP) is a routing protocol for an autonomous system running on TCP. BGP is the only
protocol used to handle networks like the size of the Internet, and the only protocol that can properly handle
multiple connections between unrelated routing domains. BGP is built on the experience of EGP. The main
function of the BGP system is to exchange network reachability information with other BGP systems. Network
reachability information includes information about the listed autonomous systems (AS). This information ef-
fectively constructs a topology map of the AS interconnect and thereby clears the routing loop while imple-
menting policy decisions at the AS level.
Step 11 Click “Forward > BGP”.
Step 12 Open the configuration page of “BGP”. See below:
Figure 5-51 The page of BGP
Table 5-33 BGP configuration parameter instruction
Step 13 Click “Save” to finish the basic settings of BGP.
Step 14 Click “Add” to create a new BGP rule. See below:
Parameter Details Option
BGP Service BGP function is turned on Button selection:
⚫
Enable
⚫
Disable
Gray status indicates the currently se-
lected status
Router As
The router is configured with the sys-
tem number. The same AS is called
IBGP. The different AS is called EBGP.
Manual input
Value area:[0,65535]
Router ID
Route ID, which is used in BGP when
routing
Manual input
Format1: A.B.C.D