Doc. Version 1.0
24
H8922 3G/4G Router User Manual
Table 5-1
The instruction of LAN Parameter
Parameter
Details
Operation
Host name
The name of router
Manual input, Maximum length limited to 32 word
type character,Please refer to the
“
Parameter Spec-
ification Table
”
for input specifications.
IP1~4
Used to divide subnets, these
subnets can communicate with
each other, and IP1~4 represent
4 subnets.
Enter it manually. Format: A.B.C.D/M, please refer
to "Parameter Specification Table" for input specifi-
cations.The default IP1: 192.168.8.1/24, and IP2~4
are input in the above format, but the contents be-
tween the two cannot be the same.
Loopback
address
The virtual interface address of
the router, which is configured
and will not disappear due to the
LAN interface being closed.
Enter it manually. Format: A.B.C.D/M, please refer
to
“
Parameter Specification Table
”
for input speci-
fications.
Lan Config-
ure
Duplex mode and port rate for
setting the lan port
The following pull frame selection method is used
to select the port rate and duplex mode. The de-
fault is auto mode.
Step 4
Click Save to complete the configuration of connection type of the LAN port .
When the user changes the IP1 address, if the page does not automatically jump, please make sure that the user's computer has
the same network address as the modified LAN address, or set the computer to automatically obtain the IP, and then enter the
new one in the browser.
---END
5.2.2
WAN
The WAN is mainly used to connect to the Internet through Ethernet. The connection modes are static IP,
DHCP, and PPPoE.
Step 1
Log in to the WEB configuration page of the H8922 4G Router.
For details, see
“
5.2.1 Logging In to the WEB Configuration page
”
.
Step 2
Single click
“
network > WAN
”
.
Open the page of WAN , as shown in Figure 5-4.
Summary of Contents for H8922
Page 1: ...User Manual H8922 3G 4G Router www hongdian com...
Page 157: ......
