Doc. Version 1.0
116
H8922 3G/4G Router User Manual
Step 3
Input IP address or domain to be tested in “Destination”, click “Ping, to check whether the
router can be linked with destination. See below:
Table 5-45
The instruction of parameters of Network Test
Parameter
Details
Operation
Mode Type
Choose a different type of network test.
single button:
⚫
Ping
⚫
Trace
⚫
MTR
Destination
Set the destination IP address or domain
name to use for testing.
Fill in the destination IP address or
domain name to be used for testing.
Packet Size
When the type of network detection is
"Ping" and "MTR", the size of the packet can
be set.
Enter it manually.
Input range: 1~65535
Don't Fragment
When the network detection type is "Ping",
you can set whether the ping packet carries
the DF identifier. DF is the identification bit
of the slice.
Single box.
Unchecked by default
Reslove Names
When the network detection type is "MTR",
you can set whether to perform name reso-
lution.
Single box.
Unchecked by default
start
Click “start” to start the selected network de-
tection mode.
No
Trace: Traceroute. Through Traceroute, we can know what path the computer from the computer to the other
end of the Internet is. It takes a long time to send a small packet to the destination device until it returns. Each
device Traceroute on one path is measured 3 times. The output includes the time (ms) of each test and the
name of the device (if any) and its IP address.
---END
5.7.6
Files
Firmware Setting
The H8922 supports upgrading the system files on the local network. Before upgrading, please make sure that
you have obtained the target file of the system update and have saved the update files on the computer on the
LAN.
Step 1
Click “System > Files” to open the page of
“Files”.As shown in figure 5
-76.
Summary of Contents for H8922
Page 1: ...User Manual H8922 3G 4G Router www hongdian com...
Page 157: ......
