Doc. Version 1.0
51
H8922 3G/4G Router User Manual
Step 3
Configure SNMP parameter.
Table 5-11
The instruction of SNMP Parameter
Parameter
Details
Operation
SNMP service
To enable or disable SNMP service
Options:
⚫
Enable
⚫
Disable
Basic Config
SNMP Version
SNMP version setting, support for SNMPV2c
and SNMPV3
Dropdown list:
⚫
SNMPV2c
⚫
SNMPV3
Port
SNMP port, suggest to be default port161
Value area: 1~65535
Default: 161
Community
The community password of the SNMP service
that the SNMP client connects to the router
for identification
WORD type, Maxium 32 bytes
Trap IP
Link-state router report server address
Manual input
Format: A.B.C.D/Mask
Trap Port
Link-
state router report server address’s port
Value area: 1~65535
Default: 162
Loopback Status
Match with "LAN" page loopback address, in
the "Loopback Status" to "Enable", means
loopback address configuration successfully,
the router reported Trap IP packet source ad-
dress is the loopback address, If the "Loopback
Status" to "Disabled" means router IP packet
source address for the LAN port address
Options:
⚫
Enable
⚫
Disable
Source Interface
(configured when
SNMP version is
selected
for
SNMPV3)
Used to specify the source address of the mes-
sage packet when communicating with the
SNMP tool.
Dropdown list:
⚫
default
⚫
br0
⚫
modem
⚫
eth0
SNMPv3 Setting
Mode
SNMP authentication encryption mode selec-
tion, support 3 modes: authenti encryp-
tion, authenti no encryption, no authen-
ti no encryption
Dropdown list:
⚫
Auth Priv
⚫
Auth NoPriv
⚫
NoAuth NoPriv
Usname/Password
User username and password authentication.
The entered username and password must be
the same as those set on the SNMP tool. Other-
wise, the connection cannot be made.
Enter it manually.
Username ranges from 1 to 32
characters.
Password value range 8~32
Summary of Contents for H8922
Page 1: ...User Manual H8922 3G 4G Router www hongdian com...
Page 157: ......
