Shenzhen Hongdian Technologies H3526 MDVR, User Manual

Page: 39 / 91

Hongdian Corporation
27
H3526 MDVR User Manual
Figure 3-10 Setting Interface of Access Server
Step 5 Configure relevant parameters according to the parameter information in the interface.
H3526 MDVR can simultaneously connect two servers, and theserver in Group2 is
disabledin default settings.
See “2.1.1 access server settings” of H3526 MDVR Parameters Details (V1.0) for the
parameters details of “access server settings”.
Front-end a ccess server address and devi ce ID a re confi gured based on the a ctual condi tions, and other
pa ra meters a re defaul ts. The devi ce shall be res ta rted after i ts ID is modified.
Step 6 Click “Save” to finish the operation of access platform server.
---Finish
Configuration inspection
Step 1 Check whether 3G/4G indicator of H3526 MDVR is normally on, 3G/4Gnetworkhas been
connected if the light is on.
Step 2 Check whether ONLINE indicator of H3526 MDVR is normally on, the device has been
registered in the platform if the light is on.
Step 3 Click “Device Status”. The modem dial succeeds and the cellular network has been
connected when “IP” in “Modem Net Info” has been acquired. The device has been
connected to the platform if “Center Online Status->Server 1 Online Status” displays
“Online”.