Standalone DVR User Manual
9
3 System Operating Instruction
3.1 Start System
When connect 12V DC power supply to the device, the system starts. After the system start-up
completely, the
【
POWER
】
indicator will become green, and the RUN indicator will be flashing
continually. There are three ways of starting the system: 1. long-press the
【
POWER
】
button on
the remote control for 5 seconds; 2. the ignition signal of the vehicle; 3. system sets timing
starting system. Note: the system will auto shutdown when unplug the lock of the HDD.
3.2 Shutdown System
There are three ways of soft-shutdown system: 1. long-press the
【
POWER
】
button on the
remote control for 5 seconds; 2. the ignition signal of the vehicle; 3. system sets timing shutdown
system. Through necessary processing, after about 5 seconds, the system will shutdown and the
power led will turn off and the run led will turn on.
Shutdown system by power disconnection: unplug the 12V power input, the system will stop
working. As unplug power directly may affect the HDD and SD card, we suggest you
soft-shutdown the system before unplugging the power.
3.3 Basic Operation Instruction of Menu
3.3.1 Enter Menu Mode
Enter the system menu by pressing the
【
MENU
】
button on the remote control or clicking the
right mouse button.
3.3.2 Menu Component Instruction
Menu component units mainly include:
(1) Check box: “√” means valid, blank means shield. There are two operating modes: 1. use
the
【
OK
】
button or the
【
↑
】
,
【
↓
】
button on the remote control; 2. click the left mouse button
to operate.
(2) Selection box: provide two or more than 2 options, but only one option can be selected.
Press the
【
↑
】
,
【
↓
】
button on the remote control or click the left mouse button to switch.
(3) List box: display the search result information in the list. You can select one item from list.
If you press the
【
OK
】
button or click the left mouse button, the recording file will play; if press
the number “0” or the
【
FN
】
key or the right mouse button, you can select/cancel the recording
file in order to backup the recording file.
(4) Edit box
a) You can switch the input character including number, uppercase and lowercase letters and
mark by the
【
FN
】
key on the remote control.
b) You can move the cursor position by the
【
←
】
,
【
→
】
key on the remote control.
c) You can delete the character before the cursor by the
【
viop
】
key on the remote control.
d) After completing the input, press the
【
MENU
】
key on the remote control, you can exit the
edit status.
(5) Button: used to conduct a specific function or enter the submenu. Press the
【
OK
】
key on
