Standalone DVR User Manual
26
3.8.7 Bus Information
DeviceID:
Used to set the ID number of every device.
DeviceName:
Used to set the device name which is the same as the device name set up in “Info”.
BusNo:
Used to set the bus number of the vehicle, facilitating management.
Note:
All information in this item can’t be restored to the factory setting, but you can manually
modify the relevant information.
3.8.8 Overlay Setting
Preview:
Used to set up whether to display time, channel number, bus number and if there is
flashing prompting when video loss under preview mode. “Open” means display this item when
preview while “Close” means not display this item on the interface when preview.
Recording:
Used to set up whether to display time, channel number and bus number in the
recording file. “Open” means display this item in the recording file while “Close” means not
display this item in the recording file.
