Standalone DVR User Manual
24
Thus, the settings of the cruise path include the parameter settings of the cruise point,
preset point, retention time and cruise time etc, then enter “set” to set the cruise path and
cruise path number. At present, one device supports the setting of 16 cruise path
numbers.
Track:
Track is a line which is used to record the predefined irregular movement of the camera.
Enter “Set” to set the track.
CopyTo:
Click the application to button at the bottom, apply the current configuration to the
corresponding channel (selected channel). (need to click
【
OK
】
button to save, click
【
Cancel
】
button to exit without saving.
3.8.3 PTZ Control
Enter the PTZ control Interface
Press the
【
PTZ
】
button on the remote control or click the left mouse button to enter;
The introduction of the PTZ Control function
The main operations of PTZ Control are: direction control; rotation; zoom control;
adjust the focus; adjust the iris. In addition to the rotation function, other four options
can choose the control speed.
Switch the page to invoke the preset point; start/stop auto cruise; wiper control; light
control; auxiliary equipment control.
Note: The invoked preset point must have been set up. For the setting method of the cruise
path, please refer to the cruise path number setting in 3.8.2.9 PTZ setting. When the cruise
path number set up is less than 2 digits, you need to add 0 to fill up 2 digits before the value
of the corresponding cruise path number set up.
3.8.4 Log Information
Search the log information record in the device according to the log type and the start and end
