Page 7
05_GP-BA-XXXXXXA-015XXX12_E0
00690
11131
800454
00690
11104
Fig. 6
11104
11104
800454
00690
800372
Wind
Brace
11131
00690
4. ASSEMBLE WIND BRACES
Assemble all of the wind braces as shown
in
Fig. 4
. Securely fasten the joints with the
hardware indicated.
11005
11179
00648
00690
Fig.4
Fig.5
5. CONNECT THE FRONT END RIB TO THE MIDDLE RIBS
A.
With help, move the front end rib into the desired staked area.
B.
Place the ShelterLock
®
(800372) on the upright as shown in Fig. 5.
C.
From the outside of the rib insert the bolt through the upright and then through the ShelterLock
®
.
D.
Place the plain end of a Cross Rail (11102) over the bolt and nest it into the ShelterLock
®
.
Repeat steps A-D for the each of the middle ribs.
E.
Place the wind brace over the Cross Rail. Install the nut onto the bolt and tighten.
800454
800372
00690
11102
6. CONNECT THE BACK END RIB
The Cross Rails for the last rib will have two plain ends (11104).
Take the wind brace and attach it between the end rib and the last middle rib as shown in Fig. 6.
