Mersea 4 Air
Instructions & care manual
Some of the images shown in these instructions are other similar
Kampa tents and are for illustration purposes only.
2
IMPORTANT:
Under certain conditions all tents will suffer from internal
condensation. Depending upon the atmospheric conditions,
the weather and the amount of moisture in the ground, the
condensation could be quite severe and is commonly
mistaken for leaking, especially as it can run down the inside
of the roof and drips off ties tapes and other internal
fittings. If you suspect your tent is leaking it is almost
certainly condensation.
The tent material has a waterproof PU coating over its entire
surface and the main seams of your tent have been factory
taped to help prevent leakage. Depending upon your
expectations, it may be necessary to treat the remaining
seams with a seam sealant. Seams treated with seam
sealant cannot leak. Seam sealant should also be applied to
areas where the taping is damaged or has peeled away
through wear and tear. It can also be applied to areas where
a leak may have developed. Seam sealant is available from
your dealer.
WELCOME
Thank you for purchasing your Kampa AirFrame tent. Please read these
instructions carefully before attempting to set up your tent and retain for future
reference. If used properly, your tent should give you years of trouble free
use. We recommend that your tent is insured against accidental and storm
damage as this is not covered by the warranty.
This tent is designed for use in light to moderate weather. During very strong
winds or snowfall we recommend that you take your tent down. The tent is
designed for touring use; it is not designed for static or commercial use.
We recommend a trial run before using your tent for the first time. This will
allow you to familiarise yourself with the tent, its set up and any limitations the
tent may have for your particular use.
