![background image](http://html1.mh-extra.com/html/exped/orion-extreme/orion-extreme_instructions_2451609001.webp)
INSTRUCTIONSORIONEXTREME2210
|
Copyright Exped AG, Switzerland.
TIPS AND TRICKS
Before leaving on your next adventure, check that your
tent is complete and free of damage. Check the tent poles
for cracks and burrs.
Appropriate ventilation can prevent condensation within
the tent. Vent the tent regularly by at least opening the
doors partially at the upper end.
To secure the pegs in loose earth, sand or snow, wrap
the tent cord around the center of the peg and bury it
horizontally. You can also use the packsack filled with
sand or snow, or use the Exped Snow and Sand Achors
available separately.
Note!
Never light a stove in a tent as it is a fire hazard or
can lead to carbon monoxide poisoning.
When camping on sand or snow you can dig a trench in
the vestible. Cold air will sink into the trench. At the same
time it can be used to sit comfortably.
If you need more space in the vestibule, partially
unhook the canopy, leave your sleeping gear inside and
use it as a backrest for comfortable lounging.
Should your tent remain stationary over a longer period,
protect it from UV by placing a cheap tarp over it.
A tent footprint (available separately) protects the tent
floor from damage and can also reduce condensation
build up.
For more information visit:
exped.com.
INSTRUCTIONS
ORION EXTREME AND
ORION UL
ENGLISH
6
Place the accessory
bag at one end of the
folded tent and roll
together tightly before
placing it in the packsack.
5
Lay out the tent and
fold in thirds lengthwise to
fit the packsack.
3
1
2
4
5
6
TEARDOWN
Clean out the tent and close the zippers leaving
a 10 cm gap.
Note!
Normally, the canopy and rainfly
remain attached. For tear down in rain, the canopy
can be disassembled and packed away dry. For
the next setup, set up the rainfly first and then mount
the canopy.
1
Remove all pegs and
release the tent cords.
The pegs are stored in the
accessory bag.
2
First, release tension
on the ridge pole and
push it out of the sleeve
(never pull).
3
Next, release tension
on the main poles and
push them out of the
sleeves (never pull).
4
Carefully disassemble
the poles and place them
in the pole sack.
REFINED GEAR FOR ADVENTURE