Page 6
05_GP-BA-XXXXXXA-015XXX12_E0
NOTE: FRAME EXTENSION KIT
2. ASSEMBLE END RIBS
3. ASSEMBLE MIDDLE RIBS
Assemble end ribs as shown in
Fig. 2
. Securely
fasten all of the joints with the hardware indicated.
Assemble middle ribs as shown in
Fig. 3
. Securely
fasten all of the joints with the hardware indicated.
A
B
BUILDING
LENGTH
15 ft.
WIDTH
Fig.1
1. PLOTTING THE FRAME:
Before building your shelter, you should choose a flat area on
your property and plot your shelter.
A.
Stake out the area for the shelter in the desired spot. The width of
the area should be at least equal to the width of the shelter and the
length should be equal to the length of the shelter
Fig. 1
.
B.
Measure diagonally from corner to corner (A & B). These
measurements should be the same. If they are not equal the stakes
need to be adjusted until the width, length and inside measurements
are correct.
Fig.2
Fig.3
11113
11113
11114
11114
11051
11051
11051
11051
11182
11112
11112
11182
11113
11113
800057
800057
Use #11131
5
/
16
" x 2
3
/
4
" L
Bolts
Use #11131
5
/
16
" x 2
3
/
4
" L
Bolts
Your model may have more middle ribs than shown in the illustration on page 3. You will receive one extra rib for
every extra 4 ft. of building length that you purchase. The basic frame assembly will remain the same. The cover
will be the correct size for the length of the building you purchased.
