Operating Instructions
Page 15
RevA
The Bottom Row
Dive Time
The current length of the dive in minutes
and seconds
Surface Interval
When on the surface, the Dive Time is
replaced by a surface interval display.
Shows the minutes and seconds since the end of your
last dive.
Above one hour, the surface interval is displayed in
hours and minutes. Above 4 days, the surface interval
is displayed in days.
42
18
:
1850
21/00
42
:18
ft
103.6
4:57
21
%
!
1753
2045
0
SURFACE
m
h
34
12
18/45
0.7
1753
2045
0
SURFACE
m
h
34
12
18/45
0.7
Bottom Row, OC Rec Mode
on a dive
Bottom Row, CC/BO Mode
at the surface
Alternate Active Gas and Set point Location
When the info row is not displaying the active
breathing gas (or diluent), or the current internal set
point, these values are displayed in the bottom row.
The alternate active gas location is at very bottom of
the computer display.
The alternate Set point location is at the far right of
the bottom row.
Notification Setting Icon
Indicates what notifications are turned on. Only
available at the surface.
Alert Indicator
Indicates there is a persistent warning
condition.
When the computer detects a dangerous situation,
such as high PPO2, a warning is triggered. The large
primary warning can be dismissed, but for some
critical situations this alert icon will persist until the
condition that caused the warning is resolved. See the
Alerts section on page 22 for more information.
Beep Only
Silenced
Beep and Vibrate
Vibrate Only
42
:18
ft
103.6
4:57
21
%
!
The surface interval resets when
decompression tissues are cleared.
Summary of Contents for Teric
Page 1: ...Operating Instructions...
