Operating Instructions
Page 13
RevA
Deco Clear Counter
Safety Stop Counter
Time-To-Surface (TTS)
The Deco Row
The Deco Row is only shown in the Standard layout,
however, the Deco row information described below
is shown on the first page of the info row in the Big
layout.
No Decompression Limit (NDL)
Deco Stop Depth and Time
Once Mandatory decompression is required, NDL will
be replaced by decompression information.
By default the Teric uses a 10ft (3m) last stop depth.
At this setting, you may perform the last stop at 20ft
(6m) with no penalty. The only difference is that the
predicted time-to-surface will be shorter than the
actual TTS since off-gassing is occurring slower than
expected. There is also an option to set the last stop
to 20ft (6m) if you wish.
See the Decompression Stops section on page 25
for details.
20
NDL
5
NDL
The time remaining, in minutes, at the
current depth until decompression stops
will be necessary.
Displays in Yellow when the NDL is less
than 5 minutes.
125
DECO
20 2
O2/He
ft
min
The shallowest depth to which you
can ascend and how long to hold
that stop.
42
0
CLEAR
1:14
In OC Tec and CC/BO mode, the deco
clear counter appears in the DECO box
and counts up from zero to show for
how long your decompression has been
clear.
42
0
SAFETY
3:22
In OC Rec mode, the safety stop
counter counts down automatically
when in the safety stop range. Displays
“Clear when the safety stop has
completed.
See the Safety Stops section on page
24 for details.
125
14
T1
min
TTS
23
The time-to-surface in minutes. This
is the current time to ascend to the
surface including the ascent plus all
required deco stops and safety stops.
125
O2/He
TTS
23
NDL
21
21
.0
0
ft
STOPWATCH
SURFACE
Deep
19:16
FD
CLEAR
SAFETY
Important!
All decompression information including
Deco Stops, NDL, and Time to surface are
predictions that assume:
• Ascent rate of 33fpm / 10mpm
• Decompression stops will be followed
• All programmed gases will be used as
appropriate
Read more about Decompression and
Gradient Factors on page 26.
Summary of Contents for Teric
Page 1: ...Operating Instructions...
