Operating Instructions
Page 12
RevA
3.4. Detailed Descriptions
The Top Row
The top row shows depth, ascent rate, battery and
mode information.
Depth
Displayed to one decimal place in feet or meters.
Note: If the depth shows a Flashing Red zero or shows at
depth at the surface, then the depth sensor needs service.
Ascent Rate Display
Shows how fast you are currently ascending
graphically and numerically.
1 arrow per 10 feet per minute (fpm) or 3 meters per
minute (mpm) of ascent rate.
Note: Deco calculations assume 33fpm (10mpm)
ascent rate.
6
ft
125
.
7
m
32
.
42
66
23
when less than 30 fpm / 9 mpm
(1 to 3 arrows)
YELLOW
when greater than 30 fpm /
9 mpm and less than 50 fpm / 15 mpm
(4 or 5 arrows)
FLASHING RED
when greater than
60 fpm / 15 mpm (6 arrows)
Freedive Mode Ascent / Decent Rate Display
Freedivers ascend much faster than SCUBA divers. So,
ascent rate in freedive mode is measured in feet per
second (fps) or meters per second (mps) rather than
feet per minute or meters per minute.
In freedive mode, 1 arrow per 1 fps / 0.3mps.
Descent rate is displayed in addition to ascent
rate in freedive mode.
Read more about Freedive Mode on page 35.
Battery Icon
The battery icon is shown on the surface but
disappears when diving. If low or critical then the
battery icon will appear while diving.
Dive Mode Indicator
The dive mode indicator is only shown at the surface
(except CC & BO mode).
when battery change is OK
YELLOW
when battery needs to
be charged.
RED
when battery must be
charged immediately.
OC
BO
OC
BO
CC
OC
BO
CC
FD
OC
BO
CC
FD
GA
OC
Rec
OC
Tec
Open Circuit Recreational (OC REC)
Open Circuit Technical (OC TEC)
Closed Circuit
Bailout (Available in CC/BO mode)
Freedive
Gauge Mode
ft
85
.
6
TTS
23
OC
Tec
NDL
OC
BO
CC
FD
2.6
1.3
Summary of Contents for Teric
Page 1: ...Operating Instructions...
