30
Potential Pinch Points.
Keep hands clear of Post
Driver
while
o p e r a t i n g .
Never
place hand(s) on top of a
post when inserting it
into the Post Driver.
Always close the safety
arm when driving the
post.
4.
With the drive ram in the raised position and
the safety arm swung out of the way, place
a fence post in the I-beam, under the drive
ram hammer plate.
Positioning post in driver.
NOTE: There
should be a 1” to 2” gap
between the top of the fence post and the
bottom of the drive ram hammer plate.
Never drive a fence post without the guard
in place.
Post to hammer plate gap shown with a transparent
Debris Guard.
5.
Close safety arm frame to secure the post
(the adjustable roller assembly keeps
tension on the post while it is being driven).
Safety Arm closed onto post.