18
first position and align Driver with lower base
plate pivot location
(A below)
,
then install
mounting pin.
Adjust forward tilt crank and side
tilt crank to align upper mounting pin holes
(B
below)
, then install upper mounting pin.
Secure pins with included cotter pins.
Manual Base Plate Assembly
.
Connection to Hydraulic Supply
The customer must supply suitable hydraulic
quick disconnect fitting for connecting pressure
supply hose. For return hose to the tractor or
power supply hydraulic system, use the
appropriate adaptor listed for you tractor in the
TRACTOR LISTING
spread sheet, see your
dealer or distributor.
Hydraulic Valve & Hose Installation
IMPORTANT NOTICE
Hydraulic system fittings that require a
thread sealant must be installed with a paste-
type sealer only. Do not use a tape-type
sealer, such as Teflon Tape, as this can
contaminate the system and voids the valve
warranty.
Single Lever Control Valve for Manual Base
Plate
Manual Tilt Base Control Valve (see parts chart below).
1.
Remove the plugs from the hydraulic control
valve.
2.
Install the hydraulic valve (item 2) on Valve
Bracket (item 2) using three (3) 5/16-18 x 2-
1/2
” valve mounting bolts, washers, and nuts.
NOTE: Do not over-tighten the hardware,
which can warp valve body.
3.
Attach the valve and mounting bracket to the
Driver Base Plate using base plate mounting
hardware in the right rear side of the plate.
4.
Screw in hydraulic fittings (items 6, 7, & 8) as
shown above. The
45° SAE#10MORB-
3/4FNPT Adapter (
Item 6) goes into
‘B
’
working port on top of the valve. The 90°
SAE#12MORB-1/2FNPS Adapter (item 7)
goes into the
‘IN’
pressure port on the side of
the valve. The 90° SAE#12MORB-3/4FNPT
Adapter (item 8) goes into the
‘OUT’
side
return port on the valve.
Manual Tilt Base Control Valve hoses.
Single Lever Control Valve for Manual Base Plate Parts List
Item
Qty.
Part No.
Description
1
1
SM-001-PVBP
Plate, Valve Bracket VP-01
2
1
VP-01-SP
Valve
–
1 Spool
3
1
SM-0234-P
Hose Assy., 1/2 x 120
4
1
SM-025-R
Hose Assy., 3/4 x 120
5
1
SM-0252-R
Hose Assy., 3/4 x 48
6
1
F-6902-10-12
Adapter, 45
°
SAE#10MORB-3/4FNPT
7
1
CTP-69011208
Adapter, 90
°
SAE#12MORB-1/2FNPS
8
1
SC-50-H52
Adapter, 90
°
SAE#12MORB-3/4FNPT
1
8
2
6
4
3
7
5
B
A