SHARX SECURITY HTNC Series, Api Reference Manual, Page: 95 / 228

rgn3_name=New&md_rgn3_type=1&md_rgn3_thre=50&md_rgn3_sen=20&md_rgn3_time=
30&md_rgn3_rgntype=grid&md_rgn3_left=1&md_rgn3_top=1&md_rgn3_right=4&md_rgn
3_bottom=4&
Response :
res=200&ch=1&md_enable=0&md_rgn_count=3&md_rgn1_id=2&md_rgn1_name=New(1)
&md_rgn1_type=1&md_rgn1_thre=2&md_rgn1_sen=44&md_rgn1_time=3&md_rgn1_rgnty
pe=grid&md_rgn1_left=1&md_rgn1_top=3&md_rgn1_right=3&md_rgn1_bottom=6&md_rg
n2_id=3&md_rgn2_name=New(2)&md_rgn2_type=1&md_rgn2_thre=2&md_rgn2_sen=55&
md_rgn2_time=3&md_rgn2_rgntype=grid&md_rgn2_left=7&md_rgn2_top=4&md_rgn2_rig
ht=9&md_rgn2_bottom=6&md_rgn3_id=4&md_rgn3_name=New&md_rgn3_type=1&md_r
gn3_thre=50&md_rgn3_sen=20&md_rgn3_time=30&md_rgn3_rgntype=grid&md_rgn3_left
=1&md_rgn3_top=1&md_rgn3_right=4&md_rgn3_bottom=4&
* As for the above, method=save means app=get and then set with response.
* In the save operation, you must send current information as a whole, otherwise the parameter
not transmitted will be deleted.
* In Motion setup or Motion Day & Night setup, you need to use the save operation, so be
careful not to delete current information.
Caution
You must check the following values in the response to http://”camera ipaddress”/config.txt
Item Value Explanation
options
VMD Motion Event function available
DAY_NIGHT
Motion Day & Night function available