SHARX SECURITY HTNC Series, Api Reference Manual, Page: 177 / 228

-177-
System – Media check:
Version : 1.00
Date : 2014. 03. 04
Revision History
Version Date Comment
1.00 2014-03-04 Initial version
Introduction
This Chapter defines the detailed setup for the Media Check.
Media Check URI
http://”camera ipaddress”/system/check_media.php
Media Check Parameter
Parameter Type Value
media_v_ch#¹_strm#²_en boolean (ro) 0 : Off, 1 : On
media_v_ch#¹_strm#²_codec string (ro) Current codec
media_v_ch#¹_strm#²_res string (ro) Current resolution
media_v_ch#¹_strm#²_fps integer (ro) Current fps
media_v_ch#¹_strm#²_bitrat
e
integer (ro) Current bitrate
media_a_snd#³_enable boolean (ro) 0 : Off, 1 : On
media_a_snd#³_codec string (ro) Current codec
media_a_snd#³_in_gain string(ro) / integer(ro) AUTO / Current Audio Input Volume
media_a_snd#³_samplerate integer (ro) Current Sampling rate
media_a_snd#³_bitrate integer (ro) Current bitrate
* #¹ : Current channel / #² : Current stream number / #³ : Current audio channel
Caution
1) Parameter - “media_a_snd#³_enable”
In the camera web page “ Setup – Audio ”, if audio is enabled it shows 1, and 0 incase of Disabled
audio
With API “ Audio Example - 2 Audio setup ” you can setup audio disable or enable
2) Parameter - “media_a_snd#³_in_gain”
In the camera web page “ Setup - Audio - Audio Input –if Auto ” is checked,, it shows Auto, and
Input Volume in case of unchecked.
With API “ Audio Example - 9 Audio enable=1, AUTO GAIN setup ” you can check or uncheck
the Auto item when Auto is unchecked , With API “ Audio Example - 7 Audio enable=,
GAIN setting ” you can setup Audio Input Volume.