SHARX SECURITY HTNC Series, Api Reference Manual, Page: 65 / 228

-65-
Event – Audio detection:
Version: 1.00e
Date: 2014. 03. 17
Revision History
Version Date Comment
1.00 2014-01-23 Initial version
1.00e 2014-03-17 English Translation
Introduction
This Chapter defines the detailed setup procedure for the Audio detection.
Audio detection URI
http://”camera ipaddress”/event/audio_detection.php
Audio detection Parameter
Parameter Type Value
audio_detection_enable
boolean
0 : Off, 1 : On
audio_detection_level
integer
1 : Low, 2 : Middle, 3 : High
audio_detection_time
integer
1 ~ 180
Examples
1) get the current setting
http://”camera ipaddress”/event/audio_detection.php?app=get
2) Audio detection setup
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_enable=1
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_enable=0
3) Audio detection level setup
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_level=1
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_level=2
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_level=3
4) Audio detection Dwell time setup
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_time=3
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_time=0
If the audio_detection_time is assigned to a value less than 1, the value is set to the minimum
value (1).
http://”camera ipaddress”/event/audio_detection.php?app=set&audio_detection_time=183
* If audio_detection_time is assigned to a value bigger than 180, the value is set to the maximum
value (180).
Caution
You must check the following values in the response to http://”camera ipaddress”/config.txt