SHARX SECURITY HTNC Series, Api Reference Manual, Page: 183 / 228

-183-
System – Network check:
Version : 1.00
Date : 2014. 03. 04
Revision History
Version Date Comment
1.00 2014-03-04 Initial version
Introduction
This Chapter defines the detailed setup procedure for the Network Check.
Network Check URI
http://”camera ipaddress”/system/check_network.php
Network Check Parameter
Parameter Type Value
wired_status boolean (ro) 0 : Disconnected, 1 : Connected
net_dhcp boolean (ro) 0 : Off, 1 : On
net_ip string (ro) Camera IP address
net_gateway string (ro) Camera gateway address
net_dns string (ro) DNS sever address
wireless_status boolean (ro) 0 : Disconnected, 1 : Connected
wireless_dhcp boolean (ro) 0 : Off, 1 : On
wireless_ip string (ro) Camera wireless IP address
wireless_mask string (ro) Camera wireless Subnet Mask address
wireless_gateway string (ro) Camera wireless gateway address
wireless_dns string (ro) Camera DNS sever address
traffic_net integer (ro) ETH0 transmitter,receiver traffic
traffic_wireless integer (ro) WLAN0 transmitter,receiver traffic
live_streaming_cnt integer (ro) 0 or 1 or 2 or 3 …
playback_streaming_cn
t
integer (ro) 0 or 1 or 2 or 3 …