SHARX SECURITY HTNC Series, Api Reference Manual, Page: 100 / 228

-100-
Event – PIR:
Version: 1.00e
Date: 2014. 03. 17
Revision History
Version Date Comment
1.00 2014-02-05 Initial version
1.00e 2014-03-17 English Translation
Introduction
This Chapter defines the detailed setup procedure for the PIR.
PIR URI
http://”camera ipaddress”/event/pir.php
PIR Parameter
Parameter Type Value
pir_enable boolean 0 : Disable, 1 : Enable
pir_level integer 1 : Low, 2 : Middle, 3 : High
pir_time integer 1~180
Examples
1) Get the current setting
http://”camera ipaddress”/event/pir.php?app=get
2) PIR setup
http://”camera ipaddress”/event/pir.php?app=set&pir_enable=0
http://”camera ipaddress”/event/pir.php?app=set&pir_enable=1
3) PIR sensitivity level setup
http://”camera ipaddress”/event/pir.php?app=set&pir_level=1 ( Low )
http://”camera ipaddress”/event/pir.php?app=set&pir_level=2 ( Middle )
http://”camera ipaddress”/event/pir.php?app=set&pir_level=3 ( High )
4) PIR dwell time setup
http://”camera ipaddress”/event/pir.php?app=set&pir_time=1
http://”camera ipaddress”/event/pir.php?app=set&pir_time=180
Caution
You must check the following values in the response to http://”camera ipaddress”/config.txt
Item Value Explanation
options PIR
PIR available