Sharper Image SI670, Instructions Manual

Page: 19 / 30

19
Automatic Channel Programming
If you only have a coaxial connection and wish to control chan-
nels through the receiver/monitor (as you would with a standard
TV), follow these steps:
1. Turn on the receiver/monitor and the VCR (if connected) off.
2. To activate mode selection options, press the MODE SELECT
button.
3. Select TV mode.
4. To select Auto Program mode, press the BRIGHTNESS
or button on the side panel.
5. To set source option to CATV (cable) or AIR (antenna), press
the /- buttons.
6. To begin the Auto Program function, press the CHANNEL
button. It will take several minutes for the monitor to memo-
rize all available channels from your cable connection.
Mode Selections