Sharp XV-Z17000, Operation Manual

Page: 19 / 82

Setup
-17
Projection (PRJ) Mode
The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most ap-
propriate for the projection setting in use. (You can set the PRJ Mode in “SCR-ADJ” menu. See page
45
.)

Table mounted, front projection

Ceiling mounted, front projection
Menu item

“Front”

Table mounted, rear projection
(with a translucent screen)
Menu item

“Rear”
Menu item

“C Front”

Ceiling mounted, rear projection
(with a translucent screen)
For details, refer to “Screen Size and Projection Distance” on page
18
.
Example : When using a wide screen (16:9)
Indication of the Projection Image Size and Projection Distance
4'1" ~ 4'9"
(1.3 m ~ 1.4 m)
8'3" ~ 9'6"
(2.5 m ~ 2.9 m)
10'4" ~
11'11"
(3.1 m ~ 3.6
m)
20'7" ~ 23'9"
(6.3 m ~ 7.2 m)
51'6"
(15.7 m)
500" (1270 cm)
200" (508 cm)
100" (254 cm)
80" (203 cm)
40" (102 cm)
35"
×
20"
(89 c
m ×
50 cm)
70"
×
39"
(177 cm
×
100 cm)
87"
×
49"
(221 cm
×
125 cm)
174"
×
98"
(443 cm
×
249 cm)
436
"
×
245
"
(1107 cm
×
623
cm )
Picture Size
Projection
Distance
Ceiling-mount Setup

It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before
mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain
the recommended ceiling-mount adaptor and unit (sold separately).
Menu item

“C Rear”
XV-Z17000̲E̲US.indb 17 XV-Z17000̲E̲US.indb 17 2010/12/17 11:16:16 2010/12/17 11:16:16