Sharp XV-Z17000, Operation Manual

Page: 17 / 82

Quick Start
-15
4.
Turn the video equipment on and start playback
5.
Select the input mode
Page 27
Press
HDMI1
on the remote control to select “HDMI1” for the Input mode.
• Press
HDMI1
,
HDMI2
,
COMPONENT
,
S-VIDEO
,
VIDEO
and
COMPUTER
on the remote control to
switch the Input mode.
•
Press P or R to select your desired input mode when you press
INPUT
on the remote control or on the
projector.
6.
Adjust the projector angle, focus and zoom
Page 24
1. The focus is adjusted by
rotating the focus ring.
2. Zooming is adjusted by
rotating the zoom ring.
3. The projector angle is
adjusted by using the
adjustment feet.
Focus ring Zoom ring
Adjustment feet
7.
Turn the power off
Page 23
Press
STANDBY/ON
on the projector or
STANDBY
on the remote control, then press that button again
while the confi rmation message is displayed, to put the projector into standby mode.
HDMI1 button
Playback
On-screen display
•
When the image is distorted
trapezoidally, the keystone
correction is needed.
(See page
25
.)
1
STANDBY
button
On the remote control
HDMI1
YPbPr
1080P
On the projector
2
1
STANDBY/ON button
XV-Z17000̲E̲US.indb 15 XV-Z17000̲E̲US.indb 15 2010/12/17 11:16:14 2010/12/17 11:16:14