Basic Operation
-33
Geometric Adjustment
Upper Left
Upper Right
Lower Right
Lower Left
GEOMETRIC ADJUSTMENT
1
Press
KEYSTONE
on the pro-
jector or on the remote control
repeatedly until “GEOMETRIC
ADJUSTMENT” is displayed.
2
Press the buttons below to ad-
just the position, size or focus
of the projected image.
•
Match screen’s four sides to green
test pattern.
•
Pressing
'
'
'
'
'
,
"
"
"
"
"
,
\
\
\
\
\
or
|
|
|
|
|
on the projector
or
H&V LENS SHIFT
on the remote
control allows you to shift the lens.
•
Pressing
ZOOM +/–
on the projector or
on the remote control allows you to ad-
just the projected image size.
•
Pressing
FOCUS +/–
on the projector
or on the remote control allows you to
adjust the focus.
3
Press
ENTER
on the projector
or on the remote control.
4
Press
'
,
"
,
\
or
|
to move the
position for the upper left of the
image.
•
Move the upper left of the yellow frame
onto the upper left of the screen.
5
Press
ENTER
to set the posi-
tion.
6
Repeat the same procedure with the
positions for the upper right, lower
right and lower left of the image.
•
At this time, pressing
UNDO
on the pro-
jector or on the remote control returns
to the previous screen.
•
Before correcting the upper left of the
image, pressing
UNDO
returns to the re-
set confirmation screen.
•
When the position of the lower left is
set, the correction is made and the
display disappears.
•
If the message “Can not correct.” is dis-
played, step 2 may have been performed
incorrectly. In this case, go back to step
2 and try the procedure again.
▼
On-screen display
Summary of Contents for XG-P560W - WXGA DLP Projector
Page 86: ...SHARP CORPORATION ...
