E-38
Specifications are subject to change without notice.
Specifications
Product Type
Model
Video system
Display method
LCD panel
Lens
Projection lamp
Contrast ratio
Video input signal
S-video input signal
Video (monitor) output signal
Horizontal resolution
Audio output
Computer RGB input signal
RS-232C input terminal
Mouse input terminal (for IBM/Mac)
Mouse input terminal (for PC98)
Speaker system
Rated voltage
Rated frequency
Power consumption
Operating temperature
Storage temperature
Cabinet
I/R Carrier frequency
Laser Pointer of Remote Control
Dimensions (W
×
D
×
H)
Weight
Supplied accessories
Replacement parts
LCD Projector
XG-E1200U
PAL/SECAM/NTSC 3.58
LCD panel
×
3, RGB optical shutter method
Panel size:
1.3" (19.8 [H]
×
26.4 [W] mm)
Display method:
Translucent TN liquid crystal panel
Drive method:
TFT (Thin Film Transistor) Active Matrix panel
No. of dots:
519,168 dots (832 [H]
×
624 [V])
1-1.6 zoom lens F2.5 to 3.2, f = 48 to 76 mm
370 W Metal halide
100:1
BNC Connector:
VIDEO, composite video, 1 Vp-p, sync negative, 75
Ω
terminated
RCA Connector:
AUDIO, 0.5 Vrms more than 22 k
Ω
(stereo)
4-pin mini DIN connector
Y (luminance signal):
1 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
BNC Connector:
VIDEO, composite video, 1Vp-p, sync negative, 75
Ω
terminated
RCA Connector:
AUDIO, 0.5 Vrms more than 2.2 k
Ω
(stereo)
580 TV lines (video input)
3 W + 3 W (stereo)
Video Signal:
15-pin mini D-sub connector (RGB 1),
BNC connector (RGB 2):
RGB separate type analog input: 0-0.7 Vp-p,
positive, 75
Ω
terminated
Stereo Minijack:
AUDIO, 0.5 Vrms, more than 22 k
Ω
(stereo)
Horizontal sync. signal: TTL level (positive/negative) or composite sync
(Apple only)
Vertical sync. signal:
Same as above
9-pin D-sub male connector for controlling personal computer
9-pin D-sub female connector for wireless mouse
9-pin mini DIN connector for wireless mouse
3" (8 cm) round
×
2
AC 120 V
50/60 Hz
520 W
41°F to 104°F (5°C to 40°C)
–4°F to 140°F (–20°C to 60°C)
Plastic
40 kHz
Wave length : 670 nm
Max. output : 1 mW
Class
II
Laser Product
14.1
0
×
20.8
0
×
7.7
0
(359
×
528
×
195 mm) projector only
17.5
0
×
20.8
0
×
7.7
0
(444
×
528
×
195 mm) incl. terminal cover
30.8 lbs. (14.0 kg)
Remote control unit, Four AA batteries, Extra air filter, RGB signal cable
(9.8', 3 m), Macintosh adaptor, Two BNC/RCA adaptors, Mouse control cable for
IBM PS/2 (5.9", 15 cm), Mouse control cable for Mac (5.9", 15 cm), Mouse control
cable (9.8', 3 m), AC cord, Terminal cover, Lens cover (installed)
Lamp unit (Lamp/cage module) (BQC-XGE1200U1), Remote control (RRMCG
1354CESA), Air filter (PFILD0055CEZZ), RGB signal cable (QCNW-4422CEZZ),
Macintosh adaptor (QPLGJ1511CEZZ), Mouse control cable for IBM PS/2 (QCNW-
4754CEZZ), Mouse control cable for Mac (QCNW-4755CEZZ), Mouse control
cable (QCNW-4620CEZZ), AC cord (QACCU5013CEZZ)
This will not affect the picture quality or the life expectancy of
the unit.
If you have any questions about this matter, please call toll free
1-800-BE-SHARP (1-800-237-4277).
U.S.A. ONLY
Our projector uses LCD (Liquid Crystal Display) panels. These very
sophisticated panels contain 519,168 pixels (
×
RGB) TFTs (Thin
Film Transistors).
As with any high technology electronic equipment such as large
screen TVs, video systems and/or video cameras, there are certain
acceptable tolerances that the equipment must conform to. Sharp’s
acceptable tolerances permit a total of 6 inactive TFTs, which may
result in illuminated or inactive dots on the picture screen.
