E-22
ON/OFF
POWER
LAMP
TEMP.
Basic Operation of the Projector
1
When the power is on, the LAMP
REPLACEMENT indicator flashes
to show the operating condition of
the lamp.
Green:
Lamp is ready
Flashing green:
Warming up
Red:
Change bulb
ON
A.C.120V
C.A.120V
OFF
1
AC cord
1. Connect the AC cord.
Connect the supplied AC cord to the AC inlet on the side
of the projector .
2. Turn on the MAIN POWER.
Press the MAIN POWER switch on the side of the projec-
tor. The POWER indicator lights red and the projector
enters STANDBY mode.
3. Turn on the POWER.
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control.
•
When the power is turned off by pressing the POWER
ON/OFF button, the POWER indicator will not turn off
until the fan has stopped running.
•
See page 33, “Lamp/Maintenance Indicators” for
details.
Notes:
•
When the POWER indicator is not lit, the remote control
cannot be used to operate the projector.
•
If the power is turned on immediately after it has been turned
off, it may take a short while before the lamp turns on. (During
this period the LAMP REPLACEMENT indicator flashes.)
•
After the projector is unpacked and turned on for the first time,
a slight odor may be emitted from the exhaust fan. This odor
will soon disappear with use.
4. E-ZOOM Function
This projector has an E-ZOOM mode which enlarges the
display when inputting an image of less than 800
×
600
dots in size. The E-ZOOM button on the projector or on
the remote control is used to operate E-ZOOM function.
See page 28, “E-ZOOM Function” for details.
Notes:
•
E-ZOOM function does not operate in SVGA (800
×
600), Mac
16" (832
×
624), NTSC, PAL or SECAM INPUT mode.
•
The picture size differs in RGB, NTSC, PAL and SECAM
INPUT modes.
2
MAIN
POWER
switch
Projector
ON/OFF
Remote control
ON/OFF
ON
OFF
ON/OFF
3
ON/OFF
POWER
LAMP
TEMP.
ON
OFF
When the MAIN
POWER is on, the
POWER indicator
lights red.
2
4
E-ZOOM (ON)
E-ZOOM (OFF)
