Sharp XG-C55X - Conference Series XGA LCD Projector Operation Manual Download Page 76

Page: 76 / 106

-72

Canceling the Keylock
Setting

When the Keylock Level is set to “Normal”,
all buttons are functional.

Select “

Keylock Level

” in the “Options

(2)” menu on the menu screen and set
“ Normal”.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.

•

If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.

Selecting the Transmission Speed (RS-232C)

This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.

Selecting the Transmis-
sion Speed (RS-232C)

Select “RS-232C” in the “Options (2)”
menu on the menu screen.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.

•

Make sure that both the projector and
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.

-72

Locking the Operation Buttons on the Projector

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector











































































































Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands

Sharp XG-C55X - Conference Series XGA LCD Projector, Operation Manual

Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands