Sharp XG-C55X - Conference Series XGA LCD Projector Operation Manual Download Page 75

Page: 75 / 106

Easy to Use Functions

-71

Reversing/Inverting Projected Images

This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.

Setting the Projection
Mode

Select “PRJ Mode” in the “Options (2)”
menu on the menu screen.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

If a password has been set, the password
input box will be displayed when select-
ing the “PRJ Mode”.

•

This function is used for the reversed im-
age and ceiling-mount setups. See page

for these setups.

Locking the Operation Buttons on the Projector

This function can be used to lock the use of certain operation buttons on the projector.
The following are the three keylock levels.

Setting up the Keylock

Select “Keylock Level” in the “Options
(2)” menu on the menu screen.

➝

For operating the menu screen, see

pages

42 to 45

Note

•

If a password has been set, the password
input box will be displayed when select-
ing the “Keylock Level”.

Selected Item

Front

C Front

Rear

C Rear

Description

Normal image

Inverted image

Reversed image

Reversed and inverted image

Keylock Level

Normal

Level A

Level B

Description

All operation buttons are functional.

Only INPUT/VOLUME buttons on the projector are available.

All operation buttons on the projector are unavailable.

Front

Rear

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector











































































































Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands

Sharp XG-C55X - Conference Series XGA LCD Projector, Operation Manual

Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands