Sharp XG-C55X - Conference Series XGA LCD Projector Operation Manual Download Page 40

Page: 40 / 106

Image Projection

Press

to temporarily turn

off the sound.

Note

•

Pressing

again will turn the

sound back on.

Selecting the On-screen
Display Language

The on-screen display language of the projec-
tor can be set to English, German, Spanish,
Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.

Press

•

The menu will be displayed.

Press

to select “Lan-

guage”.

Press

to select the de-

sired language, and then press

Press

•

The desired language will be set as
the on-screen display.

-36

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector











































































































Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands

Sharp XG-C55X - Conference Series XGA LCD Projector, Operation Manual

Search results

Summary of Contents for XG-C55X - Conference Series XGA LCD Projector

Reviews:

Related manuals for XG-C55X - Conference Series XGA LCD Projector

Brands by name

Popular brands