Sharp ViewcamZ VL-Z500E-S Operation Manual Download

Page: 64 / 127

Useful Features
Playback

Useful Features

Copying an Image
from Tape to Card

Available mode:

Tape Playback

You can capture your favourite image frame
from a video tape recording and save it on
card.

Insert the recorded Mini DV cassette
and a card in the camcorder.

Set the camcorder to Tape Playback
mode, then begin tape playback.

Press

on the Operation button at

the point where the desired image
appears.

• A still picture of the image appears.

Note:

• To cancel the still picture, press

again.

AUDIO

1 +

AUDIO

1 +

Press the PHOTO button to copy the
image to the card.

• The

indicator flashes red while

the image is copied.

VL-Z500E-E-049-055

04.2.17, 9:20 AM

Summary of Contents for ViewcamZ VL-Z500E-S
































































































































Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands

Sharp ViewcamZ VL-Z500E-S, Operation Manual

Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands