Sharp ViewcamZ VL-Z500E-S Operation Manual Download

Page: 10 / 127

viii

Dirty Video Heads

When the video heads have become
clogged with dirt (dust and tape coating
particles),

• mosaic-like noise appears on the

playback picture. (See illustrations above.)

• playback pictures do not move.

• during playback, the whole screen

becomes blue.

Using a Cleaning Tape (Commer-
cially Available)

Available mode:

Tape Playback

You can clean the video head with a
commercially available cleaning tape.

Notes:

• Excessive use of the cleaning tape may

cause damage to the video heads. Please
read the instructions accompanying the
cleaning tape carefully before using it.

• The fast forward and rewind functions cannot

be used when the cleaning tape is in the
camcorder.

• If the video heads again become clogged

with dirt soon after cleaning, this might be
caused by a damaged tape. In this case,
stop using that cassette immediately.

Insert a cleaning tape into the
camcorder.

Set the camcorder to Tape Playback
mode.

• The video head cleaning screen

appears.

Press

on the Operation button to

begin video head cleaning.

• “NOW CLEANING” flashes during

cleaning.

• After about 20 seconds, video head

cleaning automatically finishes, and
“EJECT THE CASSETTE.” displays.

Remove the cleaning tape.

To cancel cleaning, press

Causes of video head clogging

• High-temperature and high-humidity

environment

• A lot of dust in the air
• Damaged tape
• Worn tape
• Long-time use
• Dew formation

If the video heads become clogged, the

indicator appears on the screen. Contact

the nearest SHARP service centre or your
dealer for further advice.

Precautions

S T O P

S T A R T

CL EA N I NG

C LE AN I NG

NOW

Striped noise

Mosaic noise

VL-Z500E-E-*ii-viii

04.2.17, 9:13 AM

Summary of Contents for ViewcamZ VL-Z500E-S
































































































































Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands

Sharp ViewcamZ VL-Z500E-S, Operation Manual

Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands