Sharp ViewcamZ VL-Z500E-S Operation Manual Download

Page: 17 / 127

Preparation

Removing

Make sure that the Power switch is
set to OFF, then open the LCD
monitor to a 90° angle to the
camcorder body.

Slide the battery release in the
direction of the arrow.

Take the battery pack out.

Notes:

•

BEFORE REMOVING THE BATTERY PACK,
ALWAYS STOP RECORDING OR PLAY-
BACK AND TURN THE POWER OFF.

Removing the battery pack while shooting or
during playback may damage the tape by
causing it to wrap around the video head
drum or destroy the card, rendering it
unreadable and unwritable.

• Remove the battery pack from the camcorder

if you will not use the camcorder for a long
period of time.

• Make sure that the battery pack is firmly

attached during operation. If it is not, the
battery pack may come off or camcorder
operation may fail because of the poor
contact pressure.

• To prevent damage to the battery pack when

removing, be sure to firmly hold the battery
pack while pressing the release.

• Use only SHARP model BT-L227 battery

packs with this camcorder. Use of other
batteries may create a risk of fire or
explosion.

• Before closing the LCD monitor, make sure

the battery pack is properly attached to the
camcorder, otherwise the monitor may be
damaged.

Battery release

90°

VL-Z500E-E-006-021

04.2.17, 9:17 AM

Summary of Contents for ViewcamZ VL-Z500E-S
































































































































Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands

Sharp ViewcamZ VL-Z500E-S, Operation Manual

Search results

Summary of Contents for ViewcamZ VL-Z500E-S

Reviews:

Related manuals for ViewcamZ VL-Z500E-S

Brands by name

Popular brands