Sharp ViewcamZ VL-Z100S-S, Operation Manual

Page: 73 / 96

Advanced Features
63
To Record from an External
Source
1
In Playback mode, press the MENU
button to display the menu screen.
2
Press
l
or
m
on the Operation
button to select
Z
, then press the
centre of the Operation button.
3
Press
l
or
m
to select “S-VIDEO
IN”, then press the centre of the
Operation button.
4
Press
l
or
m
to select “ON” (for S-
video connection) or “OFF” (for video
connection), then press the centre of
the Operation button.
5
Press the MENU button to turn off the
menu screen.
• “S-VIDEO” appears on the screen
during a pause or Recording
Standby mode when you set the S-
VIDEO IN menu item to “ON” in step
4 above.
6
Begin playback on the source
equipment connected to the
camcorder.
• Check the camcorder screen to see if
the picture is properly received.
7
Press the Record Start/Stop button
on the camcorder, then press
m
to
begin recording.
O T H E R S 1
B E E P
R EMO T E
D E F A U L T
L A N G U A G E
S - V I D E O I N
R E T U RN
O F F
ON
Notes:
• To pause recording, press
m
. Press
m
again
to resume recording.
• To operate by remote control (not supplied),
perform steps 1 to 6 above, and press the
TAPE REC START/STOP button, then press
the PLAY/STILL button (
g
).
• If a digital video recording with a copyright
protection signal is used as the playback
source, “COPYRIGHT PROTECTED.”
appears on the camcorder monitor and the
recording function is disabled.
VL-Z300S/VL-Z100S-GB-057-066 04.2.12, 1:58 PM 63