Sharp ViewcamZ VL-Z100S-S Operation Manual Download Page 68

Page: 68 / 96

Advanced Features
Playback

Advanced Features

Audio Dubbing
Feature

You can add narration to recordings made
with this camcorder, while preserving the
original audio and video recordings.

Microphone for Audio Dubbing

You can use the built-in monaural micro-
phone to record narration.

Note:

• You cannot use audio dubbing with

recordings made in LP mode.

Audio Recording

In normal recording mode

12-bit audio recording

The audio is recorded in monaural on
Audio 1.

Audio 1:

Monaural sound

Audio 2:

No audio

16-bit audio recording

The audio is recorded in monaural on two
separate channels.

Audio 1:

Monaural sound

Audio 2:

Monaural sound

In Audio Dubbing mode

12-bit audio recording

The dubbed audio is recorded on Audio 2.

Audio 1:

Original monaural sound

Audio 2:

Dubbed monaural sound

16-bit audio recording

The dubbed audio is recorded on Audio 2
over the original monaural sound.

Audio 1:

Original monaural sound

Audio 2:

Dubbed monaural sound

Notes:

• You can select the 12-bit or 16-bit audio

recording mode by performing the procedure
on page 41.

• You can perform audio dubbing, such as

music, on Audio 2 if you connect another
source via the AV cable. If the audio to be
dubbed was recorded in 12-bit audio
recording mode, it can be recorded on Audio
2 in stereo sound.

Built-in monaural

microphone

VL-Z300S/VL-Z100S-GB-057-066

04.2.12, 1:58 PM

Summary of Contents for ViewcamZ VL-Z100S-S

































































































Search results

Summary of Contents for ViewcamZ VL-Z100S-S

Reviews:

Related manuals for ViewcamZ VL-Z100S-S

Brands by name

Popular brands

Sharp ViewcamZ VL-Z100S-S, Operation Manual

Search results

Summary of Contents for ViewcamZ VL-Z100S-S

Reviews:

Related manuals for ViewcamZ VL-Z100S-S

Brands by name

Popular brands