Sharp VC-A410U, Operation Manual

Page: 15 / 38

15
Dimensions: 257
⳯
182 mm
F L E ( M ) S d n . B h d . V C - A 4 1 0 / 4 2 0 U ( 1 0 - 1 5 )
EZ Set Up (With Auto Clock Setting)
The EZ Set Up function automatically sets the tuner channels and clock when the antenna cable is connected to
the rear of the VCR and the power plug is then connected to an AC outlet.
IMPORTANT:
When using a cable box:
• See Cable TV Connections .
• Leave POWER on the cable box turned on and select a channel that carries EDS signals.
IMPORTANT (Caution during EZ Set Up):
• Do not press the POWER button on the
VCR or remote control.
• Do not insert a video cassette into the VCR.
!
Make sure that the antenna cable is connected. For
connection configuration, refer to
Connecting the
VCR .
@
Connect the VCR power plug to an AC outlet.
#
The tuner channels and clock will automatically be
set. The POWER LED indicator will flash quickly to
indicate the setting.
• This VCR can monitor and use time-signals (EDS
signals), which are provided by some TV stations, to
automatically adjust the VCR clock. This VCR
automatically searches EDS signals, but if you are in
a hurry to use timer recording or know the channel
of the EDS signal carrier in your area, follow the
procedure in
Auto Clock Setting or Manual Clock
Setting .
$
When the setting is completed, POWER LED indicator
will flash slowly.
• If power is supplied to the VCR before the cable is connected, EZ Set Up will not be able to preset the channels into
memory. If this occurs unplug the VCR from the power source and wait a few minutes. Check the cable/antenna connection
and supply power to the VCR. EZ Set Up will automatically begin again.
• If the power is turned on during EZ Set Up, the Auto Channel setting will be interrupted and the tuner channels will not be
able to be preset.
• Auto Clock Setting may take several minutes.
• If the Auto Clock Setting is not completed within 30 minutes, there may be no channels with EDS signals. In this case, set the
clock manually. (See Manual Clock Setting .)
• If the antenna signal is weak, the Auto Clock Setting function may not operate.
• During initial channel setting, the channels are set into the AIR channel setting. To watch a cable TV channel, select “CATV”
on the CHANNEL PRESET screen. (See Setting the Channels .)
During Auto Channel Setting and
Auto Clock Setting
EZ Set Up complete
佣
POWER VCR REC
REMOTE SENSOR TAMPER
PROOF TIMER
POWER VCR REC
REMOTE SENSOR TAMPER
PROOF TIMER
Flashes quickly
Flash slowly